Rematch Controller Not Working: Easy Fixes to Get You Back in the Game

If your Rematch controller is not working, it can quickly turn your gaming session into a frustrating experience.

Whether you are playing on PC or Xbox, controller issues like unresponsive buttons, stick drift, or connection problems can stop the fun. The good news is many common problems have simple solutions.

This guide will walk you through practical steps to troubleshoot and fix your Rematch controller so you can get back to gaming without delay.

Key Takeaways

• Check your USB-C cable and connections first. A loose or faulty cable is often the cause of controller issues.
• Restart your game and platform. Sometimes a quick reboot clears temporary glitches.
• Install or update drivers on PC. Proper drivers ensure your controller communicates correctly with your system.
• Clean your controller’s buttons and sticks. Dirt and residue can cause stick drift and sticky buttons.
• Use platform-specific settings. Adjust Steam Input or Xbox ports to improve compatibility and response.

Restart Your Game and Platform

One of the easiest fixes is to restart your game and the platform you are using. Closing and reopening Steam or your PC game can clear temporary bugs that affect controller input.

On Xbox, a full console restart can reset controller connections. This simple step often resolves issues without any extra effort.

Check USB-C Cable and Connections

Your Rematch controller uses a USB-C cable to connect to your PC or console. Make sure the cable is firmly plugged into both the controller and the device.

Try different USB ports to rule out port problems. If the cable looks damaged or worn, replace it. A faulty cable can cause connection drops, button lag, or the controller not being recognized.

Install PDP Drivers on Windows PC

For Windows users, installing the correct PDP controller drivers is essential. These drivers help your PC recognize the Rematch controller and ensure all buttons and sticks work properly.

Visit the PDP website to download and install the latest drivers. After installation, restart your PC and test the controller again.

Adjust Steam Input Settings

If you use Steam, the Steam Input feature can affect how your controller works. Steam Input acts like an emulator and can sometimes interfere with third-party controllers.

For Rematch controllers, try toggling Steam Input on or off in the controller settings. This can improve compatibility, especially if you are using a PlayStation-style controller on PC.

Clean Thumbsticks to Fix Stick Drift

Stick drift happens when your controller registers movement even when you are not touching the thumbsticks.

This is often caused by dirt or residue buildup. Use rubbing alcohol and a cotton swab to gently clean around the base of the thumbsticks. This can restore smooth movement and stop unwanted drifting.

Fix Button Latency by Replacing Cable and Adjusting Display

If your buttons respond slowly, try increasing your display’s refresh rate in your PC or console settings. A higher refresh rate can reduce input lag.

Also, replace the USB-C cable if you suspect it is causing delays. A fresh cable can improve signal transmission and button response times.

Clean Sticky Buttons Carefully

Sticky buttons can ruin gameplay by sticking or not registering presses. Use rubbing alcohol and a soft cloth or cotton swab to clean around the buttons.

Avoid using too much liquid. Cleaning removes grime and restores button responsiveness.

Disassemble and Clean Triggers and Bumpers

If your triggers or bumpers feel delayed or unresponsive, disassembling the controller to clean inside can help.

Dirt or debris between the bumper and casing can block movement. Carefully open the front shell and clean the trigger springs and bumper areas. This can restore proper function.

Map Back Buttons Using PDP Control Hub

Some Rematch controllers have back buttons that may not work out of the box. Download the PDP Control Hub application to map these buttons to your preferred functions.

This software lets you customize button assignments and improve your gaming experience.

Power Cycle Your Controller

Unplug the USB cable from your controller and console or PC while both are powered on. Wait a few seconds, then plug the cable back in.

This power cycle can reset the controller’s connection and fix recognition issues.

Troubleshooting Wireless Rematch Controllers

Wireless Rematch controllers can have unique issues, but detailed troubleshooting guides are limited. If your wireless controller is not working, try restarting your console and controller, checking battery levels, and ensuring the controller is properly paired.

If problems persist, contacting Turtle Beach support may be necessary.

FAQs

Q: Why is my Rematch controller not connecting to my PC?
A: Check the USB-C cable and port, and install the correct PDP drivers. Restart your PC and try again.

Q: How do I fix stick drift on my Rematch controller?
A: Clean around the thumbsticks with rubbing alcohol and a cotton swab to remove dirt.

Q: My buttons feel delayed. What can I do?
A: Increase your display’s refresh rate and replace the USB-C cable to reduce latency.

Q: The mute button does not work. How do I fix it?
A: Double press the mute button twice. A red light indicates mute is active.

Q: How do I customize back buttons on my Rematch controller?
A: Use the PDP Control Hub app to map back buttons to your preferred functions.